电气-变压器

  The strain clamp is a metal component used to connect the transmission line tower, the wire, the lightning conductor and the insulator, or to protect the wire, the lightning conductor, the insulator and the like.   Basic requirements:  Preformed Rods  are generally made of cast steel and malleable cast iron. It is required that the line fittings should have sufficient mechanical strength to have good electrical properties for a part of the fittings connecting the conductors. In the manufacturing process, the line fittings should be free of burrs, traps, traps, and cracks. The surface should be smooth and the galvanized layer should be uniform.   The matching fittings should be of suitable specifications, no missing parts, no rust, and the screws and nuts should be well matched. The contact surface between the hull plate and the wire should be smooth, and the manufacturing quality and size should conform to the national standard.   Single Suspension for OP...

Pole line hardware,   often known as pole hardware fitting or pole line accessories, are an essential part of the construction of pole lines nowadays. Pole line hardware manufacturers classify these as utility pole mounting hardware, telephone pole component, and utility pole line hardware, depending on the type of use.   Manufacturers of pole hardware  classify them into pole mounting hardware, pole assemblies and pole line hardware depending on the type of use.   Pole line hardware is attached to complete the setup. It serves multiple purposes as it supports the power line and prevents its flow. The components required for a complete electrical installation setup are as follows: pulling clips, secondary U-clips, street light arms, pulling poles, anchors, secondary racks, yoke plates and pole straps. Preformed Line To ensure stability, only screws suitable for the specific requirements can be selected. As pole lines maintain and propagate utilities over a considerab...

    Insulators   are used in electrical equipment to support and separate electrical conductors without allowing current to pass through the insulator. Silicone rubber is the most widely used polymeric insulating material for high voltage products. Our polymer insulators offer excellent performance in a wide range of climates and harsh conditions, including coastal, desert and industrial environments.   Silicone rubber insulated polymer insulators offer unique properties and are installed all over the world.SAA Grid offers a wide range of insulators which, when combined with our flexible production methods, can provide a polymer insulator to meet your requirements.   Polymer insulators  are fast becoming the insulator of choice for recent transmission line projects. It is interesting to learn about the benefits of using polymer insulators. Here are some of the  benefits of using polymer insulators  in transmission lines. 110kV Polymer Suspension I...

Batteries for Electric Vehicles Energy storage systems, usually batteries, are essential for all-electric vehicles, plug-in hybrid electric vehicles (PHEVs), and hybrid electric vehicles (HEVs). Types of Energy Storage Systems The following energy storage systems are used in all-electric vehicles, PHEVs, and HEVs. Lithium-Ion Batteries Lithium-ion batteries  are currently used in most portable consumer electronics such as cell phones and laptops because of their high energy per unit mass relative to other electrical energy storage systems. They also have a high power-to-weight ratio, high energy efficiency, good high-temperature performance, and low self-discharge. Most components of lithium-ion batteries can be recycled, but the cost of material recovery remains a challenge for the industry. The U.S. Department of Energy is also supporting the  Lithium-Ion Battery  Recycling Prize to develop and demonstrate profitable solutions for collecting, sorting, storing, and ...